Mercedes-Benz E-Class 2010 Owner's Manual page 208

Press the = or ; button on the steer-
X
ing wheel to select the Settings menu.
Press the : or 9 button to select the
X
Inst. cluster submenu.
Press the a button to confirm.
X
Press the : or 9 button to select the
X
Dig. speedo [mph]: function.
You will see the selected setting: on or
off.
Press the a button to save the setting.
X
Selecting the permanent display function
Only vehicles with automatic transmission
have this function.
i
Vehicles for the United Kingdom: this
function is not available.
The Permanent display: function allows
you to choose whether the multifunction dis-
play always shows the outside temperature
or the speed in mph.
Press the = or ; button on the steer-
X
ing wheel to select the Settings menu.
Press the : or 9 button to select the
X
Inst. cluster submenu.
Press the a button to confirm.
X
Press : or 9 to select the Perma‐
X
nent display function.
You will see the selected setting: outside
temperature or Dig. speedom [mph].
Press the a button to save the setting.
X
Time/date
This submenu is only available on vehicles
with Audio 20.
In the Time/date submenu, you can set the
time and date.
Your vehicle could have the following audio
equipment:
A: Audio 20
B: Audio 50 APS
C: COMAND APS
Menus and submenus
Refer to the separate operating instruc-
X
tions to find out which audio system is fit-
ted in your vehicle.
Depending on the audio system, the time and
date are received from GPS satellites and
cannot be set using the on-board computer
(see the following table).
Setting using the on-board com-
puter
Automatic GPS satellite recep-
tion
Set the time zone once; see the
separate operating instructions
Press the = or ; button on the steer-
X
ing wheel to select the Settings menu.
Press the : or 9 button to select the
X
Time/date submenu.
Press the a button to confirm.
X
Press the : or 9 button to select
X
Time: or Date:.
The current time or date set is displayed.
Press a to change the setting.
X
Press the = or ; button to select the
X
display you want to change: hour, minute,
day, month, year.
Press the : or 9 button to set the
X
selected display.
Press the a button to store the entry.
X
Lights
Switching the daytime driving lights on/
off
If you have activated the Daytime driving
lights: function and the light switch is in the
c position, the daytime driving lights are
switched on automatically when the engine is
running. When it is dark, the side lamps and
the dipped-beam headlamps are switched on
automatically.
205
A B C
X
X X
X X
Z