Energy saving tips
Using the touch control sensors
To operate the touch control sensors, touch the desired panel with the tip of your pointed
finger until the relevant displays illuminate or go out, or until the desired function is
activated.
Ensure that you are touching only one sensor panel when operating the appliance. If your
finger is too flat on the panel, an adjacent sensor may be actuated as well.
NZ84J9770EK_EE_DG68-00632A-02_SV+NO+FI+DA+EN.indb 29
NOTE
You can save valuable energy by observing
the following points.
•
Always position pots and pans before
switching on the cooking zone.
•
Dirty cooking zones and pan bases
increase power consumption.
•
When possible, position the lids firmly on
the pots and pans to cover completely.
•
Switch the cooking zones off before the
end of the cooking time to use the residual
heat for keeping foods warm or for
thawing.
English 29
2016-12-06
12:29:44