Table of Contents
Advertisement
Energy saving tips
You can save valuable energy by
observing the following points.
•
Always position pots and pans
before switching on the cooking
zone.
•
Dirty cooking zones and pan bases
increase power consumption.
•
When possible, position the lids
firmly on the pots and pans to
cover completely.
•
Switch the cooking zones off before
the end of the cooking time to use
the residual heat for keeping foods
warm or for thawing.
•
The base of the pan should be the
same size as the cooking zone.
•
Using a pressure cooker reduces
cooking times by up to 50 %.
USING ThE TOUCh CONTROL SENSORS
To operate the touch control sensors, touch the desired panel with the tip of your
pointed finger until the relevant displays illuminate or go out, or until the desired function
is activated.
Ensure that you are touching only one sensor panel when operating the appliance. If
your finger is too flat on the panel, an adjacent sensor may be actuated as well.
18_ before you begin & hob use
CTR432NB02_XSM_DG68-00315A-04_EN.indd 18
Right!
Wrong!
2016-11-04
2:58:21
Advertisement
Table of Contents
