Maximum Power Limit Function; Using The Touch Control Sensors; Switching The Appliance On - Samsung NZ64K5747BK User Manual

Maximum power limit function

This function allows you to adjust the maximum power of the unit.
NZ64K5747BK_ET_DG68-00819A-02_IT+EN.indb 17
Keep the power off.
1.
Touch the Lock control sensor (for
2.
approximately 3 seconds) to turn on the
child safety lock.
Touch the Complete Timer Control
3.
for approximately 3 seconds.
4. Touch the Timer Control sensor for
approximately 3 seconds.
5. When your control panel looks like
the picture on the right side, you can
adjust the power using the Heat setting
selectors. (3000 W, 4000 W, 7200 W)
6. Touch the On/Off control sensor to
end the setting.
NOTE
In 3000W low-power mode, the Boost (P) function is not available with the Right
Front Burner (210 mm) or Flex Zone.

Using the touch control sensors

To operate the touch control sensors, touch the desired panel with the tip of your
pointed finger until the relevant displays illuminate or go out, or until the desired
function is activated.
Ensure that you are touching only one sensor panel when operating the appliance.
If your finger is too flat on the panel, an adjacent sensor may be actuated as well.

Switching the appliance on

The appliance is switched on using the On/
Off control
Touch the On/Off control
approximately 1 ~ 2 seconds.
The digital displays will show
NOTE
After the On/Off control sensor has been actuated to switch on your appliance,
a heat setting must be selected within approximately 20 seconds. Otherwise, the
appliance will switch itself off for safety reasons.
sensor.
sensor for
.
English 17
2018-07-06 3:29:19