Table of Contents
Advertisement
All manuals and user guides at all-guides.com
24
5 Press CLOCK/TIMER again to
store the setting.
™ The clock starts.
• To exit without storing the setting,
press Ç on the system.
Notes:
– During clock setting, if no button is
pressed within 90 seconds, the system
will exit clock setting mode
automatically.
– When a power interruption occurs, the
clock setting is erased.
Timer Setting
• The system can switch on to CD,
TUNER, or TAPE 2 mode
automatically at a preset time. It can
serve as an alarm to wake you up.
• Before setting the timer, make sure
the clock is set correctly.
• The timer will always be switched on
once it is set.
• The volume of the timer will
increase from the minimum
level until the volume level
before the set is switched to
standby mode.
pg 01-28/C85/37-Eng
24
TIMER
1 Press and hold CLOCK/TIMER for
– If the source selected is TUNER, the
more than two seconds to select
last tuned frequency will be switched
timer mode.
on.
™ "AM 12:00" or "00:00" or the
– If the source selected is CD, playback
last timer setting starts flashing
will begin with the first track of the
depending on whether you have
selected disc or program. If the CD
selected 12- or 24-hour mode.
trays are empty, TUNER will be
™ The
starts flashing.
selected instead.
TIMER
™ The selected source is lit while
– If the source selected is TAPE, and if
other available sources are
the preset time is reached during high
flashing.
speed dubbing, the TUNER will be
2 Press CD, TUNER or TAPE to
selected instead.
select the desired source.
– The timer will not activate if a recording
• Before selecting CD or TAPE, make
is in progress.
sure a CD or tape is loaded in the
CD tray or tape deck 2.
To switch off the TIMER
3 Press à or á on the system to
• Press TIMER ON/OFF on the
set the hour for the timer to start.
remote control.
4 Press í or ë on the system to
™ The timer is now switched off.
™ The display will show "CANCEL"
set the minute for the timer to start.
5 Press CLOCK/TIMER to store the
start time.
™ The timer is now set.
To start the TIMER again (for the
™ The
remains on the display.
same preset time and source)
TIMER
• At the preset time, the timer will be
• Press TIMER ON/OFF on the
activated.
remote control.
™ The selected source will be
™ The timer is now on.
played.
™ The
Notes:
– During timer setting, if no button is
pressed within 90 seconds, the system
will exit timer setting mode
automatically.
SLEEP TIMER
Sleep
This feature allows you to select a
length of time after which the system
will switch to the standby mode
automatically.
1 Press SLEEP on the remote control
repeatedly to select a period of time.
™ The selections are as follows (time
in minutes):
60 ™ 45 ™ 30 ™ 15 ™ OFF ™
60 ...
™ "SLEEP XX" or "OFF" will be
displayed. "XX" is the time in
minutes.
2 When you reach the desired length
of time, stop pressing the SLEEP
button.
™ After this amount of time passes,
the system will switch to the
and the
disappears.
standby mode.
TIMER
To switch off the Sleep Timer
• Press SLEEP repeatedly until "OFF"
is displayed, or press the
STANDBY ON button.
appears on the display.
TIMER
2/16/00, 9:03 AM
(only on remote control)
3139 116 19591 (ENG)
Advertisement
Table of Contents
