Philips FW-C85 Manual page 15

Hide thumbs Also See for FW-C85:
Table of Contents

Advertisement

All manuals and user guides at all-guides.com
15
• Repeat step 3 - 4 to select the
desired mid and high frequencies
Spectrum Analyzer band levels.
5 You can choose to edit the name for
the personal setting.
™ The first character of setting name
will be flashing.
6 Adjust the JOG to select the desired
alphabet, number or symbol.
™ "A to Z", "0 to 9" or "*, -, +, \, /, _".
7 Press á to confirm the selection.
™ The next character for editing will
be flashing.
• Repeat step 6 - 7 to store up to 10
characters.
8 To store the setting, press
PERSONAL again.
• Before storing the setting, you
can press à to retrace the steps
in the reverse order.
• To exit without storing the
setting, press Ç.
Notes:
– During personal setting, if no button is
pressed within 90 seconds, the system
will exit personal setting mode
automatically.
– wOOx level cannot be stored as part
of the personal setting.
– It is not possible to adjust Bass/Treble
level during personal setting, "USE
JOG" will be displayed.
pg 01-28/C85/37-Eng
15
OPERATING THE SYSTEM
DIGITAL SOUND CONTROL
BASS/TREBLE
(DSC)
The BASS/TREBLE features enable you
The DSC feature enables you to adjust
to define the sound processor settings
the system to suit your type of music.
for Bass and Treble.
1 Press to select the DSC feature.
1 Press to select the BASS/TREBLE
2 Adjust the JOG to select the desired
feature.
™ The BASS and TREBLE LED will
Digital Sound Control setting :
OPTIMAL, CLASSIC, TECHNO,
™ "ADAPT BASS AND TREBLE
VOCAL, ROCK or JAZZ.
™ The selected digital sound is
encircled.
2 Use BASS/TREBLE CONTROL to
™ "OPTIMAL, CLASSIC, TECHNO,
select the desired BASS or TREBLE
VOCAL, ROCK or JAZZ" will be
level respectively.
™ The BASS/TREBLE level will
displayed.
Note:
– For neutral setting, select CLASSIC.
• Press BASS 3 or 4 to select the
low tone level.
VIRTUAL ENVIRONMENT
™ "BASS -X or BASS +X" will be
CONTROL (VEC)
The VEC feature enables you to adjust
• Press TREBLE 3 or 4 to select the
the system to select a type of
high tone level.
environment.
™ "TREBLE -X or TREBLE +X"
1 Press to select the VEC feature.
2 Adjust the JOG to select the desired
Note:
Virtual Environment Control setting :
– "X" denotes the sound level.
HALL, CLUB, DISCO, CINEMA,
CONCERT or ARCADE.
wOOx
™ The selected environment is
There are three wOOx settings to
encircled.
enhance the bass response.
™ "HALL, CLUB, DISCO, CINEMA,
CONCERT or ARCADE" will be
1 Press wOOx PLUS (or wOOx on
displayed.
the remote control) to select between
normal or enhanced wOOx effect.
• When normal wOOx sound effect is
selected;
™ The
off.
™ "WOOX NORM" will be displayed.
• When enhanced wOOx sound
effect is selected;
™ The
be lit.
display.
2 Adjust wOOx LEVEL to select the
LEVELS" will be displayed.
desired levels of wOOx.
™ The
™ "WOOX 1, WOOX 2 or WOOX 3"
will be displayed.
increase or decrease between
Notes:
level +3 and -3.
– When Personal or Bass/Treble sound
control is selected, wOOx will be
switched off automatically.
– Some CDs or tapes might be recorded
displayed.
in high modulation. It may cause
distortion at high volume. If this occurs,
switch off wOOx or reduce the volume.
will be displayed.
Automatic DSC-wOOx /
VEC-wOOx selection
The best wOOx setting is generated
automatically for each DSC or VEC
selection. You can manually select the
wOOx setting that best suits your listening
environment.
2/16/00, 9:03 AM
OO
display is switched
W
X
OO
appears on the
W
X
OO
display lights up.
W
X
3139 116 19591 (ENG)

Advertisement

Table of Contents
loading

Table of Contents