Table of Contents
Advertisement
All manuals and user guides at all-guides.com
9
12 mm
unlock
lock
CAUTION:
– For optimal sound performance, it is
recommended to use the supplied
speakers.
– Do not connect more than one speaker
to any one pair of +/- speaker
terminal.
– Do not connect speakers with
impedance lower than the speakers
supplied. Please refer to
SPECIFICATION section of this manual.
D Line Out Connection
(wireless ready)
You can connect the audio left and right
LINE OUT terminals to a optional CD
Recorder ANALOG IN terminals. This
allows you to record in an analogue
format.
You can also install additional optional
front active speakers away from the
system (e.g. in another room) to reduce
the inconvenience of running long
speaker wires across rooms. You can
place as many remote speakers as you
like provided they operate at the same
pg 01-28/C85/37-Eng
9
PREPARATION
radio frequency. Connect the wireless
G Digital Out Connection
radio frequency transmitter to the LINE
You can record the digital sound from
OUT terminals. Place the active
the CD, through this output, on any
speakers at your preferred location. Be
audio equipment with digital input (e.g.
sure to follow the instructions supplied
CD Recorder, Digital Audio Tape (DAT)
with the active speakers.
deck, Digital to Analog Converter and
Note:
Digital Signal Processor).
– Availability of wireless transmitter and
Connect one end of the cinch cable
its peripherals are subjected to the
(not supplied) to the DIGITAL OUT
approval of local authorities. Please
socket and the other end to the audio
check with respective local safety or
equipment with digital input.When
approving authority.
connecting the cinch cable, make sure it
is fully inserted.
E Connecting other
equipment to your
H AC Power Supply
system
After all other connections have been
made, connect the AC power cord to
You can connect the audio left and right
the system and to the wall outlet.
OUT terminals of a TV, VCR, Laser Disc
player, DVD player or CD Recorder to
the AUX/CDR IN terminals at the rear
of the system.
F Subwoofer Out
Connection
Connect the optional active subwoofer
to the SUBWOOFER OUT terminal.
The subwoofer reproduces just the low
bass sound effect (e.g. explosions, the
rumble of spaceships, etc.). Be sure to
follow the instructions supplied with the
subwoofer.
Inserting batteries into the
Remote Control
• Insert the batteries (Type R06 or
AA) into the remote control as
shown in the battery compartment.
• To avoid damage from possible
battery leakage, remove dead
batteries or batteries that will not be
used for a long time. For
replacement, use type R06 or AA
batteries.
3139 116 19591 (ENG)
2/16/00, 9:02 AM
Advertisement
Table of Contents
