6 Other features
Set the alarm timer
This unit can be used as an alarm timer. You can
select disc, FM tuner, or USB as alarm source.
Note
•
Make sure that you have set the clock correctly.
1
In standby mode, press and hold TIMER
until [SET TIMER] (set timer) scrolls on the
display.
2
Press TIMER.
» [SELECT SOURCE] (select source)
scrolls on the display.
3
Press SOURCE repeatedly or the source
selection buttons on the remote control to
select a source: disc, FM tuner, or USB.
4
Press TIMER to confirm.
» The hour digits blink.
5
Press
/
repeatedly to set the hour.
6
Press TIMER to confirm.
» The minute digits blink.
7
Repeat steps 5-6 to set the minute.
Note
•
If no button is pressed in 90 seconds, the unit exits
timer setting mode automatically.
To activate or deactivate the alarm timer
In standby mode, press TIMER repeatedly to
activate or deactivate the alarm.
appears when the timer is activated.
»
Tip
•
If CD/USB source is selected, but no disc is inserted
or no USB connected, the unit switches to the tuner
source automatically.
EN
16
Set the sleep timer
Note
•
Make sure that you have set the clock correctly.
When the unit is turned on, press SLEEP
repeatedly to select the sleep timer period (in
minutes).
» When sleep timer is activated,
displayed.
Tip
•
To deactivate the sleep timer, press SLEEP repeatedly
until [OFF] (off) is displayed.
Play from external audio
device
With this unit, you can play audio from an
external audio device like MP3 player.
1
Connect the supplied MP3 Link cable to
the MP3-LINK socket.
•
•
the audio output socket of an external
device.
2
Press USB/MP3 LINK repeatedly to select
MP3 link mode.
3
Start to play the external device (see the
device's user manual).
Listen through the headphone
Plug a headphone into the
is
socket on the unit.