Tuner - Philips FW-C85 Manual

All manuals and user guides at all-guides.com
19
MINI HIFI SYSTEM
STANDBY
ON
POWER SAVE
IR SENSOR
CD 1•2•3 FM•AM
C1 • 2 • 3 BAND
CD

TUNER

SEARCH•TUNING STOP•CLEAR
CLOCK/
PROG DIM
TIMER
BASS
wOOx
PLUS TECHNOLOGY
Note:
– For 'EASY SET' feature, please refer to
page 13.
Tuning to radio stations
1 Press TUNER (FM•AM) to select
TUNER mode.
™ "TUNER" will be displayed.
A few seconds later, the current
radio frequency will be displayed.
2 Press TUNER (FM•AM) again to
select the desired waveband : FM or
AM.
3 Press à or á for more than one
second, then release.
™ The display will show "SEARCH"
until a radio station with sufficient
signal strength is found.
• Repeat this procedure until the
desired radio station is reached.
pg 01-28/C85/37-Eng 19
TUNER
TAPE 1•2 CDR/DVD
CDR
TAPE AUX
PRESET
NEXT
PLAY PAUSE PREV SIDE
DUB
A. REV RECORD
(HSD)
TREBLE
LEVEL
• To tune to a weak radio station, Notes:
briefly press à or á repeatedly
– You can cancel the automatic
until the display shows the desired
frequency and/or when the best
reception has been obtained. – If you want to reserve a section of
Storing Preset Stations
You can store up to 40 radio stations in
the memory. When a preset radio
station is selected, the preset number
appears next to the frequency on the
Manual programming
display.
1 Press TUNER (FM•AM).
2 Press TUNER (FM•AM) again to
Automatic programming
1 Press TUNER (FM•AM).
2 Press PROG for more than one
3 Press PROG for less than one
second.
™ The starts flashing and
PROGRAM
"AUTO" will be displayed.
4 Press à or á to tune to the
™ The system will search for every
available radio station in the FM desired frequency.
waveband first, then search the • If you wish to store the radio station
to another preset number, press 4
AM waveband.
or 3 (or Digit 0-9 on the remote
™ All available radio stations will be
stored automatically. The control) to select the desired preset
frequency and preset number will number.
be displayed briefly. 5 Press PROG again.
™ The system will stop searching ™ The
when all the available radio stations radio station will be stored.
are stored or when the memory • Repeat steps 3 – 5 to store other
for 40 preset radio stations is used. preset radio stations.
™ The system will remain tuned to
Notes:
the last stored preset radio station.
– When 40 radio stations are stored and
you attempt to store another radio
station, the display will show
"PROGRAM FULL". If you want to
programming by pressing PROG or Ç
(on the system only). change an existing preset number,
repeat steps 3 – 5.
preset numbers, for example preset – You can cancel manual programming
by pressing Ç (on the system only).
numbers 1 to 9, select preset 10
before starting automatic programming, – During programming, if no button is
only the preset numbers 10 to 40 will pressed within 20 seconds, the system
be programmed. will exit program mode automatically.
Tuning to Preset Radio
Stations
• Press 4 or 3 (or Digit 0-9 on the
select the desired waveband : FM or
remote control) to select the desired
AM.
preset number.
™ The preset number, radio
second.
frequency, and waveband appear
™ The
starts flashing.
PROGRAM
on the display.
™ The next available preset number
will be displayed for selection.
2/16/00, 9:03 AM
disappears and the
PROGRAM
3139 116 19591 (ENG)