Timer; Sleep Timer - Philips FW-C70 Manual

22
• To exit without storing the setting,
press Ç on the system.
Notes:
– During clock setting, if no button is
pressed within 90 seconds, the system
will exit clock setting mode
automatically.
– When a power interruption occurs, the
clock setting is erased.
Timer Setting
• The system can switch on to CD or
TUNER mode automatically at a
preset time. It can serve as an alarm
to wake you up.
• Before setting the timer, make sure
the clock is set correctly.
• The timer will always be switched on
once it is set.
• The volume of the timer will
increase from the minimum
level to the most recently
selected volume level.
1 Press and hold CLOCK/TIMER for
more than two seconds to select
timer mode.
™ " AM 12:00" or "00:00" or
the last timer setting starts flashing
depending on whether you have
selected 12- or 24-hour mode..
™ The
starts flashing.

TIMER

™ The selected source is lit while
other available sources are
flashing.
pg 01-28/C50-C70/37-Eng 22
TIMER
2 Press CD or TUNER to select the To switch off the TIMER
1 Press and hold CLOCK/TIMER for
desired source.
• Before selecting CD, make sure a CD more than two seconds.
2 Press Ç on the system to cancel the
is loaded in the CD carousel tray.
3 Press à or á on the system to set
timer.
the hour for the timer to start. ™ The timer is now switched off.
4 Press í or ë on the system to set ™ The display will show "OFF" and
the minute for the timer to start. the
5 Press CLOCK/TIMER to store the
start time. To start the TIMER again (for the
™ The timer is now set. same preset time and source)
™ The
remains on the display. 1 Press and hold CLOCK/TIMER for
TIMER
• At the preset time, the timer will be more than two seconds.
2 Press CLOCK/TIMER again to
activated.
™ The selected source will be store the start time.
played. ™ The timer is now on.
™ The
Notes:
– During timer setting, if no button is
pressed within 90 seconds, the system
will exit timer setting mode
automatically.
– If the source selected is TUNER, the
last tuned frequency will be switched
on.
– If the source selected is CD, playback
will begin with the first track of the
selected disc or program. If the CD
trays are empty, TUNER will be
selected instead (not for all versions).
– The timer will not activate if a recording
is in progress.
Get other manuals https://www.bkmanuals.com

SLEEP TIMER

Sleep Timer
control)
This feature allows you to select a
length of time after which the system
will switch to the standby mode
automatically.
disappears. 1 Press SLEEP TIMER on the
TIMER
remote control repeatedly to select a
period of time.
™ The selections are as follows (time
in minutes):
60 ™ 45 ™ 30 ™ 15 ™ OFF ™
60 ...
™ "SLEEP XX" or "OFF" will be
displayed. "XX" is the time in
appears on the display. minutes.
TIMER
2 When you reach the desired length
of time, stop pressing the SLEEP
TIMER button.
™ After this amount of time passes,
the system will switch to the
standby mode.
To switch off the Sleep Timer
• Press SLEEP TIMER repeatedly
until "OFF" is displayed, or press the
STANDBY ON button.
3139 116 19441 (ENG)
18/11/1999, 2:39 PM
(only on remote