Advertisement
Operation
The wall fan can be operated by the control panel, or the remote control.
1. Ensure the wall fan is plugged in and the power supplier is on.
2. Turn the fan ON by pressing the 'ON-OFF' button.
3. To adjust the speed, press the '+' or '-' button. The selected speed setting will
show on the display panel.
4. If oscillation is required, press the SWING button, to start & stop oscillation.
5. The MEMORY button memorise the previous speed setting when OFF.
6. There are 4 timer settings, however they can only be operated via the remote
control. Press the correspending timer button '1H', '2H', '4H' or '8H' to start the
desired time setting. The timer chosen, will display on the display panel. Note:
Only the 4 x settings can be selected, the time doesnt accummulate. The timer
can't be cancelled once activated, unless turned OFF manually.
7. Turn the fan OFF bypressing the 'ON-OFF' button.
8
Cleaning
Over time, dust can accumulate on the front & rear grille cover and fan blades, which
can affect the fans performance. It is recommended to clean the fan at least once a
month.
1. Turn the unit OFF and disconnect the appliance from the power supply.
2. Remove any dust build up with a soft brush.
3. Wipe the surface of the unit with a soft damp cloth. Mild detergent can be used
for any stubborn marks.
Do not use abrasive sponges, scouring pads, or a stiff brush to clean the fan.
IMPORTANT
The control panel and other parts must not come into contact with water or any
other liquids.
Storage
If not using the unit for an extended period of time. After cleaning please:
• Turn the unit off, unplug and take care of the mains lead & plug.
• NB- Prolonged exposure to direct sunlight will discolour the enclosure.
9
Advertisement
