Clearing The Memory - Furuno MU-170C Operator's Manual

5.3 Clearing the Memory

You may want to clear the memory to start afresh with default settings. You can do this as
follows:
1. Press the MENU key to show the main menu.
2. Press the ► key to open the SYSTEM menu.
3. Select DEFAULT RESET by arrow keys.
4. Press the ► key to select YES.
RGB1
INFRARED REMOTE
EXT BRILL CTRL
DEFAULT RESET
All custom settings will be lost.
←key: cancel
INFORMATION
RGB1 : 1280x1024
RGB2 : 640x480
DVI
VIDEO1: NTSC
VIDEO2: PAL
VIDEO3: NO SIGNAL
PROGRAM NO. : *****
5. Press the ► key again to select "reset".
6. Press the MENU key to close the menu.
RGB2 DVI VIDEO1
A A
OFF (OFF/ON)
YES
→key: reset
fH: 80KHz fV: 75Hz
fH: 31KHz fV: 60Hz
: NO SIGNAL
SYSTEM menu
VIDEO2 VIDEO3 OSD
20
SYSTEM