Furuno MU-170C Operator's Manual page 21

Remote controller
Key name
RGB1*
RGB2*
DVI*
VIDEO1**
VIDEO2**
VIDEO3**
PIP1***
PIP2***
PIP3***
BRILL (-)
BRILL (+)
MENU
Arrow keys
*: PIP window remains on the RGB1, RGB2 or DVI screen.
**: When the previous selection is PIP1, PIP2 or PIP 3, the PIP window may be erased
by pressing these keys.
***: When the previous selection is VIDEO1 (2 or 3) or the setting value on the PIP SW
TIME is from 5 to 20, these keys are inoperative. Also, pressing these keys turns the
PIP window on and off alternately.
For PIP (picture-in-picture), see "3.2 VIDEO Setting".
RGB1
VIDEO1
PIP1
BRILL
Remote controller
Shows the RGB1 signal.
Shows the RGB2 signal.
Shows the DVI signal.
Shows the VIDEO1 signal on the entire screen.
Shows the VIDEO2 signal on the entire screen.
Shows the VIDEO3 signal on the entire screen.
Shows the VIDEO1 signal in the picture-in-picture window.
Shows the VIDEO2 signal in the picture-in-picture window.
Shows the VIDEO3 signal in the picture-in-picture window.
Decreases the display brilliance.
Increases the display brilliance.
Shows the main menu.
Select the menu items.
RGB2 DVI
VIDEO2 VIDEO3
PIP2 PIP3
+
MENU
Function
14