Choosing Source For Picture-In-Picture - Furuno MU-170C Operator's Manual

Multi-purpose lcd display

Hide thumbs Also See for MU-170C:

Table of Contents

4.4 Choosing Source for Picture-in-Picture

Choose the source for the picture-in-picture window as follows:

Note1: The screen image on the picture-in-picture window can be switched automatically

among VIDEO1, VIDEO2 and VIDEO3 at the interval specified. Set the PIP SW

TIME on the OSD menu. For details, see "3.3.1 Adjusting the menu window".

Note2: The size of the picture-in-picture window can be adjusted on the VIDEO1, 2 and 3

menus. For details, see "3.2 VIDEO Setting".

1. With the RGB1, RGB2 or DVI display shown, press the PIP key.

The PIP selection window appears. This window disappears if there is no operation for

five seconds.

2. Press the ▲ or ▼ key to select the VIDEO port desired.

VIDEO can also be selected by pressing the PIP key continuously. To turn off the

picture-in-picture window, choose OFF.

3. Press the ◄ or ► key to close the window.

Note: The picture-in-picture window can be moved by pressing the arrow keys when menu

windows are closed.

VIDEO1

VIDEO2

VIDEO3

OFF

PIP selection window

Table of Contents

Mu-17oc