Furuno CSH-5L/CSH-8L Owner's Manual [Page 53]: Picture Advance Speed

Furuno color scanning sonar owner's manual csh-5l/csh-8l.

Table of contents Download Manual (89 pages, 1.47 Mb) Add to your account Write a comment Upload Manual

4.3

Picture Advance Speed

The picture advance speed determines how quickly the vertical scan lines run

across the screen. When selecting a picture advance speed, keep in mind that a

fast advance speed will expand a fish school horizontally and a slow advance

speed will contract it.

Note: Match the picture advance speed to that of the echo sounder. This setting

does not affect original echosounder setting.

1. Press the [MENU] key to open the menu.

2. Use the [RANGE] control to choose [MENU MODE] at the top of the screen.

3. Use the [GAIN] control to choose SOUNDER.

4. Use the [RANGE] control to choose ADVANCE.

5. The picture advance speed setting is locked so use the [GAIN] control to

choose YES and then press the [EVENT] key.

6. Use the [GAIN] control to adjust advance speed desired. The fractions in the

dialog box are one line produced per number of transmissions. For example,

"1/2" displays one scan line per two transmissions.

7. Press the [MENU] key to close the menu.

4.4

Measuring Depth

You can measure depth to the cross-hair cursor as follows:

1. Use the trackball to place the trackball mark inside the echosounder display.

The trackball mark changes to a cross-hair cursor.

2. Adjust the trackball to place the cross-hair cursor at the location desired.

3. Read the depth to the location at the cross-hair cursor.

Measuring depth

4. ECHOSOUNDER

4-3

Next page -> <- Previous page