Clipping Function - Panasonic GM1 Series Reference Manual

6.4 Clipping Function

■
Overview of the function
● This function sets in advance the upper limit and lower limit for the analog output value.
● When a numerical value that exceeds the upper limit or lower limit is stored in the analog
output value, the output is clipped by the preset values.
● This function makes it possible to prevent the wrong application of voltages or currents out of
the specifications to equipment to be connected.
● When Analog_4OUT parameters>Upper and lower output clipping is set to "Execute",
turn ON "Ch* clipping function execution request" to execute the function.
● The clipping function is set on a channel-by-channel basis.
■
Upper limit / lower limit clipping processing
For [Digital output value > Upper limit]
"Ch* clipping upper limit status" turns ON.
For [Digital output value < Lower limit]
"Ch* clipping lower limit status" turns ON.
Upper limit
Analog output value
Lower limit
Ch* upper limit / lower
limit output clipping
execution request
Ch* clipping upper limit
Ch* clipping lower limit
■
Analog_4OUT parameters
Setting item
Upper and lower output clipping Not execute
Upper and lower output clipping
upper limit
Upper and lower output clipping
lower limit
WUME-GM1AIO-01
status
status
Default
0
0
Analog output value > Upper limit
Analog output value < Lower limit
Settings
Select "Execute".
Specify the upper limit of the clipping function.
-32640 to +32640
Specify the lower limit of the clipping function.
-32640 to +32640

6.4 Clipping Function

(ｔ)
6-7