4.2 Setting Parameters and Performing I/O Mapping
● By directly inputting a variable name, you can create a new variable in the "I/O
Mapping" window.
● Click
to map to an existing variable.
I/O mapping input example
(Note 1)
In this example, variables are registered as shown in the following table.
Channel
Ch0_ConversionValue
Ch0_MaxHoldingValu
e
● For the description of parameters to be set and channels, see the next page.
4-6
Variables
Map to the variable "iCh0_MaxHoldingValue" created in the program
"PRG_Sample".
Create a new variable "iCh0_MaxHoldingValue".
WUME-GM1AIO-01