Table of Contents
Advertisement
22
Saving a Display-device Scheme
Display-device selections can be saved as a scheme for quick recall.
1.
Click the enable/disable button for the display devices you want to have
active.
2.
Type a name into the Scheme drop-down list field.
3.
Click Save to save the scheme.
Dynamic Display Reassignment
You can change the assignment of your Primary and Secondary display without
rebooting. If you have more than one display device available and have the
proper adapters or connectors, you can plug it in to your graphics card in order
to view or extend your desktop display to that device.
Note: Before you can change the assignment of the Primary display, at least one
Secondary display and the Extended Desktop mode must be enabled. Extended
Desktop mode is enabled through the Windows Display Property dialog, under
Settings. For more information, consult your Windows documentation.
ATI Color Tab
The Color Tab provides access to fine color settings and preset color schemes.
ATI Color
The ATI Color tab allows you to configure gamma, brightness, and contrast color
settings for both your desktop and full screen 3D environments. You can also save
settings to a color profile for easy recall. In addition, you can assign unique hotkey
combinations that allow you to adjust gamma, brightness, and contrast color
settings within your full-screen 3D applications.
ATI FireMV 2400/ATI FirePro 2450
Catalyst Control Panel
© 2008 Advanced Micro Devices, Inc.
Advertisement
Table of Contents
