Setting Up The Unit For Recording/ Importing - Sony Giga Juke NAS-50HDE Operating Instructions Manual

Setting up the unit for recording/
importing
HDD REC 
 /  /  /  /
ENTER
1
Enter the Option menu for the
respective function and select
[Setting] – [Record].
When the CD function is selected
2
Select the item to be set.
3
Set each item .
In the pull-down menu, select and
set each item (shown in the "List of
settings" below).
4
Select [Close].
List of settings
Format/Bit rate
The following table shows the selectable
audio formats when recording to the
HDD and the respective bit rate (i.e., data
HDD REC 
volume).
HDD REC 
Format
ATRAC3
ATRAC3plus
Linear PCM
MP3

(  for the UK
model)
( Factory setting)

Monitor sound
When recording an audio CD to the
HDD, you can monitor the sound while
recording. In this case, sound monitoring
also stops when the recording stops.
On

(continue)
On
(Intro play)
Off
( Factory setting)

Bit rate
66kbps
105kbps
132kbps
48kbps
64kbps
256kbps
—
96kbps
128kbps

160kbps
192kbps
256kbps
Sound monitoring is on
continuously from the first
track.
Sound monitoring is on for
the first few seconds of each
track, from the first track
to the last track. (When
recording moves to the next
track, monitor playback also
moves to the next track.)
Sound monitoring is off.
Recording is carried out
more quickly than when
sound monitoring is done.
1
GB