Connection Examples - Sony Giga Juke NAS-50HDE Operating Instructions Manual

To use a wireless LAN
When using the unit through a wireless LAN connection, follow the flowchart below to
select the connection method and setup for the unit.
Start
Do you already
have a wireless LAN
environment?
Yes
Do you have an
Ethernet/wireless LAN
media converter to
connect to this unit?
Yes
Page 89


Connection examples


Simple connection
Computer
Rear of the main unit

GB
Prepare a BUFFALO wireless
LAN router (access point)
No
and a USB wireless LAN
adaptor WLI-U2-KG54.
Prepare a BUFFALO USB
No
wireless LAN adaptor
WLI-U2-KG54.
Network cable
Try connecting the network cable that was connected
to the computer.
This is an easy way to access the Internet since this
requires no network setting on the unit.
If you want Internet access that is independent of the
computer, refer to  to  .
Notes
 This method of accessing the Internet may not be
possible for some Internet service providers.
 This method of accessing the Internet may not be
possible with some Internet providers because it
requires a modem with a built-in router. If your modem
does not have a built-in router, you must prepare a
router.
Page 89
