Lopi Evergreen NexGen-Fyre Insert Manual page 35

Maintaining Your Appliance 35
5. Remove the Baffle Cap from the front edge of the baffle board and blanket (see below).
6. Remove the second air tube following the same steps illustrated in step 3.
NOTE: You will need to support the remainder of the baffle components with your hand as you remove
the second air tube. The baffle board can be delicate so handle with care.
7. Lower the front edge of the baffle to gain access to the yoke and bypass components. Continue
supporting the front edge of the baffle.
8. Lift the yoke out of the cups on the bypass damper and remove it from the insert (see below).
© Travis Industries 11/5/2021 - 1560 Evergreen Insert