Basic Operations - Toto WASHLET SW4547AT60 Instruction Manual

Basic Operations

Operate the controls on the remote control; a beep sounds when the main unit receives the signal.
● Functions that operate
when a button is pressed
during "Rear cleansing",
"Rear soft cleansing" or
"Front cleansing".
Note
Sitting back on the toilet
• ●
seat makes it easier to
adjust the wand position
and to reduce splashing.
"Oscillating cleansing"
The wand moves back and
forth to cleanse your rear
thoroughly.
• The setting changes
between "ON" and "OFF"
each time the button is
pressed.
"Pulsating cleansing"
Cleanses with the water
pressure pulsating between
soft and strong.
"Wand CLEAN"
• The setting changes
between "ON" and "OFF"
Cleans the wand with "ewater+".
each time the button is
• The wand can be automatically cleaned when you use the cleansing
pressed.
functions (Rear cleansing, Front cleansing, etc.). (Page 20)
16
Flushing
"Full fl ush"
Performs a full fl ush.
"Light fl ush"
Performs a light fl ush.
Opening and closing
"Opening and closing the toilet seat"
Opens and closes the toilet seat.
Note
When setting Auto open/close to "OFF".
• The toilet lid opens/closes when you press the button.
• Press the button for longer than 1 second to open/
close the toilet seat.
Stopping
"Stopping"
Stops the operation.
Cleansing
"Rear cleansing"
Cleanses your rear.
"Rear soft cleansing"
Cleanses your rear with mild water
pressure.
• The setting changes between and each time
the is pressed.
"Front cleansing"
Serves as a bidet for ladies.
Drying
"Warm air drying"
Dries your rear.
● The "Water pressure adjustment","Wand position adjustment" and "Personal setting" functions are
swipe operated.
*1
"Personal setting"
You can store your preferred "Water pressure", "Wand
position" and "Warm water temperature" settings.
• ● To store a settings → Page 56
To use
• ●
(Swipe left) (Swipe right)
Select or and press the button for the cleansing you want to use.
• The "Wand position" and "Water pressure" lamps will light up for
about 10 seconds in their set positions, and the "Water temperature"
display switches.
*1 Remote control transmitter (Front side, Top side)
● Functions that operate when a button is pressed
during "Rear cleansing", "Rear soft cleansing" or
"Front cleansing".
Note
Sitting back on the toilet seat makes it easier to
• ●
adjust the wand position and to reduce splashing.
"Water pressure adjustment"
You can select from 5 levels of water pressure.
• The setting changes by one level whenever you
swipe to the left or right.
[-] Softer
[+] Stronger
• After you swipe to change the "Water pressure adjustment"
setting, the set position will light for 10 seconds.
• A light will also fl ash for about 10 seconds to indicate the
current setting when any of the cleansing buttons (rear
cleansing, rear soft cleansing, front cleansing) are pressed.
"Wand position adjustment"
You can select from 5 levels of wand position
between the front and the rear.
• The setting changes by one level whenever you
swipe to the left or right.
[▲] Moves to the front
[▼] Moves to the rear
• After you swipe to change the "Wand position adjustment"
setting, the set position will light for 10 seconds.
• A light will also fl ash for about 10 seconds to indicate the current
setting when any of the cleansing buttons (rear cleansing, rear
soft cleansing, front cleansing) are pressed.
17