Page 1
Phone : (770) 282-8686 WASHLET Warranty Registration and Inquiry For product warranty registration, TOTO U.S.A. Inc. recommends On-Line Warranty Registration. Please visit our web site http://www.totousa.com. If you have questions regarding warranty policy or coverage, please contact TOTO U.S.A. Inc., Customer Service Department, 1155 Southern Road, Morrow, GA 30260 (888) 295 - 8134 or (678) 466 - 1300 when calling from outside of U.S.A.
What functions are available on your product? Table of Contents Part No....4 Safety Precautions Keep It ..11 Operational Precautions ......12 Parts Names ......14 Preparation Clean Product name (Model) WASHLET ....16 Basic Operations SW3084T40 Part No. Mechanism of Auto Functions ...
Safety Precautions IMPORTANT SAFEGUARDS WARNING READ ALL INSTRUCTIONS BEFORE USING Do not use other water then allowed by the laws and ordinances of the Symbols and Meanings region of use. Only Use drinking water. Do not use seawater or recycled water. WARNING May result in death or serious injury.
Page 4
Safety Precautions (Continued) WARNING CAUTION This is an electrical product. Do not install it anywhere water is likely to get on Do not use the product if the main unit is unstable. the product or anywhere with humidity high enough that water is likely to form ...
Page 5
Safety Precautions (Continued) CAUTION DANGER To reduce the risk of electrocution: 1. Do not use while bathing. If a water leak should occur, always close the shutoff valve. 2. Do not place or store the product where it can fall or be pulled into a tub or sink. When the ambient temperature is likely to drop to 32 °F (0 °C) or lower, prevent damage to the pipes and hoses due to freezing.
Safety Precautions Operational Precautions (Continued) ■ For prevention of malfunctions ■ For prevention of damage Grounding Instructions ● Do not block the remote control transmitter or ●Wipe plastic areas such as the main unit and remote receiver. control with a soft cloth tightly wrung out with water. This product should be grounded.
Page 7
Parts Names Main display Right side of the main unit Power LED Seat LED Wand CLEAN LED Toilet lid cushions Energy saver LED Deodorizer outlet Water LED Toilet lid Main unit removal button Part no., etc. (Pages 34, 35) Deodorizing fi lter (Page 36) <All the LEDs light up in the fi...
Page 8
Preparation Using the Product for the First Time If the remote control is secured 1. Insert the battery 2. Turn on the power 3. Open the shutoff valve (for anti theft) Remove the remote control Remove the screw from the Insert the power plug.
Basic Operation Mechanism of Auto Functions "EWATER+" is used automatically to clean the wand. The left are default setting functions. As you approach As you sit As you stand up ● These may be changed. → "Various Operations" (Pages 26-30) Auto wand CLEAN During "Auto wand CLEAN"...
Basic Operation Using the Remote Control Operate the controls on the remote control; a beep sounds when the main unit This section is an overview of the settings that can be confi gured with the remote control. See the corresponding pages for the detailed descriptions. receives the signal.
Page 11
Temperature Adjustment Toilet Seat, Warm Water, Drying Three diff erent temperature levels (High, Medium, Low) and "OFF" setting can be made. Displaying the temperature level of When the seat the pressed button temperature and the warm When the seat Toilet seat Drying air water temperature are temperature and the warm...
Energy Saver Features Type "Auto energy saver" or "Timer energy saver" can be selected. To save energy, lower (or turn "OFF") the seat or warm water temperature. You want to save energy only You want the product to save You want to save energy for the preset duration of time.
Page 13
Energy Saver Features How to Set Remote control back side Auto energy saver Timer energy saver ● Set the Energy saver at the time you want to start it. Example: To save energy from 1 am to 7 am (for 6 hours) Timer energy Auto energy saver...
Various Operations Setting List How to Set Available Settings Setting Types Settings Bold: Initial settings Ref. Page Auto wand CLEAN / OFF • Set whether or not to clean the wand automatically Page 28 Pre-mist / OFF • Set whether or not to spray mist in the bowl unit automatically Auto Cleaning functions...
Various Operations Auto functions Cleaning Features Cleaning Features Set whether or not to clean the wand Set whether or not to spray mist in the bowl Set whether or not to deodorize automatically Set whether or not to power deodorize automatically unit automatically after sitting on the toilet seat...
Various Operations Maintenance Other settings Power Plug WARNING Other settings Power Plug (Approximately once a month) Always unplug the power plug from the outlet before maintenance or Set whether or not to use the personal setting Set whether or not to make a beep sound lock inspection.
Maintenance Main Unit Gap between the Main Unit and the Toilet Lid Main Unit Gap between the Main Unit and the Toilet Lid (Approximately daily) (Approximately once a month) The toilet lid can be removed for thorough cleaning. Soft cloth soaked Toilet paper, etc.
Maintenance Gap between the Main Unit and Bowl Unit Gap between the Main Unit and Bowl Unit [SW3084T40] [SW3084] Gap between the Main Unit and Bowl Unit Gap between the Main Unit and Bowl Unit (Approximately once a month) (Approximately once a month) You can remove the main unit to clean the top You can remove the main unit to clean the top of the bowl unit and the bottom of the main unit.
Maintenance Deodorizing Filter Wand Water Filter Drain Valve Water Filter Drain Valve Deodorizing Filter (Approximately once every 6 months) (Approximately once a month) <If you think the water pressure has weakened> Deodorizing Filter Unplug the power plug. Close the shutoff valve. •...
What to Do? Freeze Damage Prevention If the water does not fl ow due to a water service interruption When the ambient temperature is likely to drop to 32 °F (0 °C) or lower, take measures to prevent freezing. Attention! If you cannot operate with the remote control •...
What to Do? Removal of Operation Guide Long Periods of Disuse If the toilet is in a location you will not visit for a long time, drain the water. Follow the procedure below. (Failure to do so may cause breakdown or skin irritation due to polluted product tank water.) How to remove the operation guide How to drain the water Unplug the power plug.
First, try the actions described on pages 42 - 45. Rear cleansing, Rear soft cleansing, Front cleansing and Wand CAUTION If the problem persists, consult the installer, seller, or TOTO customer service. If a water leak occurs, close Ref. Trouble Please check (see contact information on the back cover.)
Page 23
The Wand CLEAN When you sit on the seat, the toilet seat heater is turned on temporarily and that generates "EWATER+". Consult the installer, seller, or TOTO customer service. LED does not light up the seat is warmed in about 15 minutes.
Safety device Temperature fuse, anti-idling fl oat switch f) Damage or loss resulting from electrical surges or lightning strikes or other acts which are not the fault of TOTO or which Backfl ow prevention device Vacuum breaker, Check valve the product is not specified to tolerate, including failure to use the factory equipped cord and plug or use of a loose or faulty Adjustable temperature range : OFF, about 82-97 °F (about 28-36 °C)