Automatic Functions (Cleaning Features) - Toto WASHLET SW4547AT60 Instruction Manual

Automatic Functions
As you
"ewater+" *1 is used
automatically to clean the
approach
wand and bowl unit.
• Operation under the initial
settings is described
below.
Removing odors inside the
bowl unit
Deodorizer
Cleans the wand with
"ewater+"* 1
Auto wand
CLEAN
Pre-mist
Cleans the bowl unit with
→A mist is
"ewater+"* 1
sprayed inside
Auto bowl
the bowl unit to
make it more
CLEAN
difficult for dirt
to adhere
Bowl light
CLEAN
indicator
(Lights up)
20
Cleaning Features
As you As you
stand up
sit
* 2
Starts the auto power
deodorizer
(After about 10 seconds)
→It stops after about 60
Starts the deodorizer
seconds
Cleans the wand
automatically
(After about 25 seconds)
Only when the cleansing
functions are used.
→The wand extends and
1
"ewater+" *
from the base of the wand
After-mist
(After auto wand CLEAN)
If the cleansing functions
are not used, after-mist
starts after about 25
seconds.
→"ewater+"* 1 mist is sprayed
on the bowl unit
Lights up
Lights up during
during
auto wand CLEAN
pre-mist
and after-mist
(Lights up in a
cycle)
Lights to show that the "CLEAN" functions are operating.
■Bowl light
Lights to show that auto bowl CLEAN
and auto wand CLEAN are operating.
■Note
• • Deodorizing filter needs regular
maintenance. (Page 33)
When the cleansing functions (Rear
• •
and Front cleansing etc,) have not
been used in 8 hours, the wand is
cleaned automatically.
(Water comes out from around the
wand.)
comes out
• • The pre-mist and after-mist are not
sprayed if the toilet seat is open.
• • The pre-mist does not work for about
90 seconds after the after-mist has
finished.
When the cleansing feature (Rear and
• •
Front cleansing etc,) is not used for
about 8 hours, mist is sprayed on the
bowl unit automatically.
Lights up continuously or in a cycle
• •
when "Auto wand CLEAN", "Auto bowl
CLEAN" or "Auto power deodorizer" is
operating.
(Lights only when the toilet seat is not
in-use)
■CLEAN indicator
Lights to show that the "clean"
functions are operating.
■ Changing
"ewater+" can also be used by
pressing the remote control button
settings
For wand
Press "Wand
"Deodorizer" ON/OFF
• •
CLEAN" button
• • "Auto power deodorizer"
ON/OFF
(After wand cleaning, water comes out
(Page 48 for all)
from around the wand.)
●To clean the wand with it extended.
→"Wand cleaning" (Page 32)
"Auto wand CLEAN"
• • For bowl unit (Manual CLEAN)
ON/OFF 1
(Page 46)
Press.
2
Select [MANUAL CLEANING].
→ Press.
3
"Auto bowl CLEAN" ON/
• •
OFF
Select [MANUAL CLEAN].
(Page 46)
→ Press.
("ewater+" mist is sprayed on the bowl unit)
Note
• • It cannot be used when the wand is out
• • "Bowl light" ON/OFF
or when you are sitting on the toilet seat.
(Page 50)
*1 What is meant by "ewater+" ?
"ewater+" helps the self-cleaning wand feature
working effectively and preventing the dirt
accumulation causing the stains.
"ewater+" is generated from potable water.
• ●
"CLEAN indicator" ON/ • ● "ewater+" helps to minimize dirty surfaces,but
• •
does not make cleaning unnecessary.
OFF
• ● The effect and duration vary depending on the
(Page 50)
usage environment and conditions.
*2 Water comes out from the area around the wand
for several seconds while water is warmed up.
21