Viessmann VITOLIGNO 300-S Operating Instructions Manual page 31

Comfort function "Party mode"
With this comfort function you can change the room
temperature of a heating circuit for a few hours, e.g. if
you have guests staying until late in the evening. You
do not have to change any existing control settings for
this.
Selecting "Party mode"
Heating circuit 1
Set room temp.
Heating program
Party mode
Economy mode
Select with
Fig. 27
Press the following keys:
1. Repeatedly, until the standard menu is dis-
ä
played.
2. / For "Heating".
| ~
3. To confirm.
d
Terminating "Party mode"
Party mode ends automatically with the next change-
over to central heating with standard room tempera-
ture, but no later than after 8 hours.
To terminate party mode prematurely, press the follow-
ing keys:
1. Repeatedly, until the standard menu is dis-
ä
played.
2. / For "Heating".
| ~
Energy saving function "Economy mode"
To save energy, you can reduce the room temperature
in standard heating mode, for example if you leave the
house for a few hours.
Selecting "Economy mode"
In economy mode, the standard room temperature is
reduced automatically.
HC1
Ù Ú
ON
Þ
(
■ The rooms are heated to the required temperature.
4. / to select "Heating circuit 1" (HC1), "Heat-
Ù Ú
ing circuit 2" (HC2), "Heating circuit 3"
(HC3) or "Heating circuit 4" (HC4).
5. / For "Party mode".
| ~
6. To confirm.
d
The room temperature during party mode is
shown in the display.
7. / For the required temperature, if you want to
| ~
change the value.
8. To confirm.
d
"Adopted" appears briefly on the display. In
the subsequent menu, "On" appears on the
right-hand side of the display.
3. To confirm.
d
4. / to select "Heating circuit 1" (HC1), "Heat-
Ù Ú
ing circuit 2" (HC2), "Heating circuit 3"
(HC3) or "Heating circuit 4" (HC4).
5. / For "Party mode".
| ~
6. To confirm.
d
"Off" appears briefly in the display. In the
subsequent menu, "Off" appears on the
right-hand side of the display.
Central heating
31