Room Temperature; Operating Program; Time Program - Viessmann VITOLIGNO 300-S Operating Instructions Manual

High performance wood gasification boiler for split logs up to 50 cm long
Hide thumbs Also See for VITOLIGNO 300-S:
Table of Contents

Advertisement

Room temperature

Press the following buttons:
1.
for the "Extended menu".
å
2.
/
to select "Heating".
|
~
3.
to confirm.
d
4.
/
to select "Heating circuit 1" (HC1), "Heat-
Ù
Ú
ing circuit 2" (HC2), "Heating circuit 3"
(HC3) or "Heating circuit 4" (HC4).

Operating program

Setting the operating program for central heating
Check if "Heating" is set for the relevant heating cir-
cuit.
Heating circuit 1
Set room temp.
Heating program
Party mode
Economy mode
Select with
Fig. 20
Press the following keys:
1.
Repeatedly, until the standard menu is dis-
ä
played.
2.
/
For "Heating".
|
~

Time program

Setting the time program for central heating
The times at which the heating circuit delivers central
heating with standard or reduced room temperature
depend on the switching time settings for the relevant
day (4 possible time phases).
If one or more time phases are set, the rooms are
heated to standard room temperature during those
times.
If no time phases are set, the rooms are heated to
the reduced room temperature all day.
For central heating, up to 4 changes between stand-
ard and reduced room temperature are possible per
day (4 time phases).
(cont.)
HC1
5.
/
for "Set red room temp".
|
~
6.
to confirm.
d
7.
/
for the required temperature.
|
~
8.
to confirm.
d
"Adopted" appears briefly on the display.
3.
To confirm.
d
4.
/
to select "Heating circuit 1" (HC1), "Heat-
Ù
Ú
ing circuit 2" (HC2), "Heating circuit 3"
(HC3) or "Heating circuit 4" (HC4).
5.
/
For "Operating program".
|
~
6.
To confirm.
d
The check mark must be next to "Heating".
If not, proceed as follows:
7.
/
For "Heating".
|
~
8.
To confirm.
d
The rooms of the selected heating circuit are heated in
accordance with the room temperature and time pro-
gram settings.
At the factory, time phase
is set for all days of the week. During that time, the
rooms are heated to the standard room temperature.
The switching times can also be set individually for
the following days or parts of the week:
The same for every day: Monday to Sunday
For separate parts of the week: Monday to Friday
and Saturday to Sunday
For every day individually: Monday, Tuesday, etc.
In the "Extended menu", you can check the current
time program under "Information". See page 40.
Central heating
!
from 06:00 to 22:00 h
27

Advertisement

Table of Contents
loading

Table of Contents