MSI Baby AT SI19 Owner's Manual page 96

Table of Contents

CHAPTER 4

Primary IDE/Secondary IDE/Floppy Port/Serial Port 1/Serial

Port 2/Parallel Port/DMA/USB Master/IRQ 0,1,3-15/NMI/

Ring/Display Activity/PCI/AGP/IDE Master

When set to Monitor, these options enable event monitoring on the

specified hardware interrupt request line. If set to Monitor and the computer

is in a power saving state, AMI

IRQ line. The computer enters the full on power state if any activity occurs.

AMI

BIOS reloads the Standby and Suspend timeout timers if

activity occurs on the specified IRQ line.

Power Off By Power Button

The setting are Delay 4 sec or Instant Off. During Delay 4 sec, if

you push the switch once, the system goes into suspend mode and if you

push it more than 4 seconds, the system turn off. During Instant Off, the

system will turn off once you push the switch.

AMI

BIOS watches for activity on the specified

4-16

BIOS USER'S GUIDE

Table of Contents