MSI Baby AT SI19 Owner's Manual page 69

Table of Contents

CHAPTER 3

Doze Mode

When enabled and after the set time of system inactivity, the CPU

clock will run at slower speed while all other devices still operate at full speed.

Standby Mode

When enabled and after the set time of system inactivity, the fixed

disk drive and the video would be shut off while all other devices still operate

at full speed.

Suspend Mode

When enabled and after the set time of system inactivity, all devices

except the CPU will be shut off.

PM Events

Power Down Activities events are I/O events whose occurrence can prevent

the system from entering a power saving mode or can awaken the system

from such a mode. In effect, the system remains alert for anything which

occurs to a device which is configured as On, even when the system is in a

power down mode.

Primary Activity/Secondary Activity

When set to Enabled (default), any event occuring at the Primary or

Secondary drive port will awaken a system which has been powered down.

COM Ports Activity

When set to Enabled (default), any event occuring at a COM

(serial) port will awaken a system which has been powered down.

LPT Ports Activity

When set to Enabled (default), any event occurring at LPT (printer)

port will awaken a system which has been powered down.

AWARD

3-24

BIOS SETUP

Table of Contents