MSI Baby AT SI19 Owner's Manual page 87

CHAPTER 4 CHAPTER 4
CHAPTER 4 CHAPTER 4 CHAPTER 4
Floppy Drive Swap
Set this option to Enabled to specify that floppy drives A: and B:
are swapped. The setting are Enabled and Disabled. The Optimal and Fail-
Safe default settings are Disabled.
®
PS/2 Mouse Support
When this option is set to Enabled, AMI® BIOS supports a PS/2®-
type mouse. The settings are Enabled and Disabled. The Optimal and Fail-
Safe default settings are Enabled.
Primary Display
This option configures the primary display subsytem in the
computer. The settings are Mono(monochrome), 40CGA, 80CGA or VGA/
EGA. The optimal and Fail-Safe default settings are VGA/EGA.
Password Check
This option specifies the type of AMI® BIOS password protection
that is implemented. The Optimal and Fail-Safe default settings are Setup.
®
Boot to OS/2
Set this option to Enabled to permit the BIOS to run properly, if
®
OS/2 is to be used with > 64MB of DRAM. The settings are Enabled or
Disabled. The Optimal and Fail-safe default settings are Disabled.
Internal Cache/External Cache
This option selects the type of caching algorithm used by AMI®
BIOS and the CPU for L1 cache memory(internal/external to the CPU). The
settings are Writeback - a writeback algorithm is used, Write-through - a
write-through algorithm is used or Disabled - AMI® BIOS does not specify
the type of caching algorithm. The algorithm is set by the CPU. The Optimal
and Fail-Safe default settings are Writeback.
, DRAM 64MB or Above
®
AMI AMI AMI BIOS USER'S GUIDE BIOS USER'S GUIDE BIOS USER'S GUIDE
AMI AMI BIOS USER'S GUIDE BIOS USER'S GUIDE
4-7