MSI Baby AT SI19 Owner's Manual page 104

CHAPTER 4 CHAPTER 4
CHAPTER 4 CHAPTER 4 CHAPTER 4
EPP Version
This option is for setting which EPP version will be used. The
settings are 1.7 and 1.9.
Parallel Port Mode
This option allows user to choose the operating mode of the
onbaord parallel port. The settings are Normal, SPP/EPP or ECP mode.
Parallel Port IRQ
If the onboard parallel mode is not on auto mode, the user can
select the interrupt line for onboard parallel port. We suggest that the user
select the interrupt for the onboard parallel port as shown below:
Onboard parallel port set at
LPT1(378H)
LPT2(278H)
LPT3(3BCH)
Parallel Port DMA Channel
This option allows user to choose DMA channel 1 to 3 for the
onboard parallel port on ECP mode.
Onboard IDE
Set this option to enable or disable on board IDE controller.
®
AMI AMI AMI BIOS USER'S GUIDE BIOS USER'S GUIDE BIOS USER'S GUIDE
AMI AMI BIOS USER'S GUIDE BIOS USER'S GUIDE
Parallel Port IRQ
7
5
5
4-24