Setting the Paper Type for the Drawer
You can set the paper type you use on the drawer.
NOTE
The factory default setting is <PLAIN PAPER>.
1
Enter the Additional Functions menu and open the <1.COMMON SETTINGS> menu.
For details about the procedure above, refer to steps 1 and 2 in "Setting Keypad Volume, Alarm Volume,
Printing End Tone, and Scanning End Tone," on p. 3-5.
2
Press
or
COMMON SETTINGS
5.SELECT PAPER
When you press
3
Press
or
To use plain paper, or transparencies, select <PLAIN PAPER>.
To use bond paper or heavy weight paper, select <HEAVY PAPER>.
SELECT PAPER
4
Press
(Stop) to return to the standby mode.
Setting the Rotate Printing
You can set the machine to automatically rotate the image when the direction of the original does
not match that of the selected paper.
NOTE
The factory setting is <ON>.
Setting Specifications That Are Common to Each Function (Common Settings)
to select <5.SELECT PAPER>, and press
, the <SELECT PAPER> menu appears.
to select <PLAIN PAPER> or <HEAVY PAPER>, and press
PLAIN PAPER
.
.
3-11
3