Restricting The Operation By Department Id - Canon IR1600 Reference Manual

5
Press

Restricting the Operation by Department ID

When the Department ID Management is set to ON, you can select whether or not to activate the
restriction on printing and copying quantity.
NOTE
The factory setting is <OFF>.
1
Enter the Additional Functions menu and open the <2.DEPT. ID MANAGEMNT>, and
press
For details about the procedure above, refer to steps 1 to 3 in "Setting the Use of Department ID
Management," on p. 4-5.
4
2
Press
DEPT.ID MANAGEMNT
When you press
3
Press
DEPT.ID MANAGEMNT
3.RESTRICTIONS
When you press
4
Press
RESTRICTIONS
1.PRINT LIMITS
4-10 Setting the Department ID Management
(Stop) to return to the standby mode.
.
or to select <ON>, and press
, the <DEPT. ID MANAGEMNT> menu appears.
or to select <3.RESTRICTIONS>, and press
, the <RESTRICTIONS> menu appears.
or to select <1.PRINT LIMITS>, and press
.
ON
.
.