Table of Contents
Advertisement
2
– Install the switch shaft, b 12.1
: Push ground wire connector with
protective tube (2) onto the
contact spring (1).
: Position the ground wire (1)
against the protective rib (arrow)
– to avoid unintentional
disconnection
48
All manuals and user guides at all-guides.com
1
: Check operation
– the short circuit wire's
connector must touch the contact
spring (arrow) in position "
– The ground and short circuit
wires must be laid close to the
housing and properly seated in
the guides, b 9.6.2
– Reassemble all other parts in the
reverse sequence.
1
– Tightening torques, b 3.5
0
".
MS 171, MS 181, MS 211
Hide quick links:
Advertisement
Table of Contents
