Clock - Philips FW-C10 Manual

All manuals and user guides at all-guides.com
RECORDING
5 Press STOP•OPEN on tape deck 1 and
tape deck 2 to stop dubbing.
Notes:
– At the end of side A, flip the tapes to
side B and repeat the procedure.
– Dubbing of tapes is only possible from
tape deck 2 to tape deck 1.
– To ensure good dubbing, use tapes of
the same length.
Recording from other sources
(only on tape deck 1)
1 Load a blank tape into tape deck 1.
2 Press CD, TUNER or AUX.
• Start playback of the selected source.
3 Press RECORD on tape deck 1 to start
recording.
™ The starts flashing.
REC
4 Press PAUSE to interrupt recording.
5 Press STOP•OPEN on tape deck 1 to
stop recording.
Note:
– During recording, it is not possible to
listen to another sound source.
18
pg 01-22/C10/22-Eng 18

CLOCK

FW- C10 MINI HIFI SYSTEM
STANDBY-ON
CD1 • 2 • 3 BAND TAPE 1 • 2
CD TUNER TAPE
TUNING
SEARCH STOP• CLEAR PLAY• PAUSE PREV
DIGITAL
DSC
SOUND
PROGRAM CLOCK•TIMER
CONTROL
DIGITAL SOUND CONTROL
View Clock Clock Setting
You can view the clock (if it is set) if the The clock can be set in either 12- or 24-
system is in Standby mode or when any hour mode, e.g. "12:00
sound source is selected (CD, TUNER, etc.). "00:00". Before setting the clock, you
The clock will be displayed for about seven must be in the View Clock mode.
seconds.
1 Press CLOCK•TIMER to select clock
• Press CLOCK•TIMER briefly. mode.
or 22:38" (the current
™ "10:38 2 Press PROGRAM to select 12- and 24-
PM
time) will be displayed depending on hour mode.
™ If 12-hour mode is selected,
whether you have selected 12- or 24-
hour mode.
™ "--:--" will be displayed if the
clock is not set. ™ If 24-hour mode is selected,
3 Set the hour with à or á on the
system.
4 Set the minute with í or ë on the
system.
5 Press CLOCK•TIMER again to store the
setting.
3/7/00, 5:05 PM
•
3 CD ROTARY CHANGER SYSTEM
•
CD REWRITABLE COMPATIBLE
•
CD SYNCHRO RECORDING
VIDEO MASTER
VOLUME
AUX
PRESET
NEXT
DIM
" or
AM
"12:00" starts flashing and the
AM
lights up.
"00:00" starts flashing.
3139 116 19311