Additional Protocol Settings; Http - Canon IMAGECLASS MF8180C Network Manual

Additional Protocol Settings

This section describes two additional protocols supported for this machine: HTTP
(HyperText Transfer Protocol) and SNMP (Simple Network Management Protocol).

HTTP

The HTTP allows you to communicate between your computer and the machine via
a web interface (i.e., Remote UI).
Before you use the Remote UI, follow the procedure below to activate HTTP on the
machine from the <NETWORK SETTINGS> menu.
1
Press [Menu].
2
Press [ (-)] or [ (+)] to select <NETWORK SETTINGS> ➞ press
[Set].
3
Press [ (-)] or [ (+)] to select <LAN SETTINGS> ➞ press [Set].
4
Press [ (-)] or [ (+)] to select <USE HTTP> ➞ press [Set].
5
Press [ (-)] or [ (+)] to select <ON> ➞ press [Set].
6
Specify the HTTP port number (default: 80) using the numeric
keys.
7
Press [Stop/Reset] to return to the standby display.
Additional Protocol Settings
2
2-23