Table of Contents
Advertisement
Note :
l
During the adjustment, keep the unit facing the
east.
Sign position control: RlOOl
1. Select channel " 2" .
2. Receive "CROSSHATCH PATTERN" signal.
3. Press the Mode OSD button on the Remote Con-
troller.
4. Adjust RlOOl to obtain the sign position as
shown below.
5. After adjustment, confirm that there is no defect
in the on-screen characters with no signal and
must be b>a.
a: the range of the error in the settlement
b: range between two crosshatch vertical lines
number with crosshatch' s third
vertical line from right.
CRT DISPLAY ADJUSTMENT
48
Advertisement
Table of Contents
