Table of Contents
Advertisement
CHECKING AND ADJUSTMENT OF TAKE-UP
TORQUE IN FAST FORWARD MODE
Remove the cassette housing control assembly.
l
Torque gauge
Set the scale to " 0"
Figure l-27.
Checking
l
Turn the torque gauge slowly
(one rotation every 2 to 3
seconds) by hand in the
take-up direction
Figure l-28.
Adjustment
l
1. If the take-up torque is outside the range, clean
the capstan D.D. motor pulley, reel belt and reel
pulley with cleaning liquid, then recheck the
torque.
2. If the take-up torque
the reel belt.
Notes :
1. Hold down the torque gauge so that it may not
fly off.
2. When checking the take-up torque, do not keep
the reel disk locked for a longer time.
ke-up reel disk
or more
The gauge is held a
its maximum value.
Take-up dIrection
is
CHECKING AND ADJUSTMENT OFTAKE-UP
TORQUE IN REWIND MODE
Remove the cassette housing control assembly.
l
Setting
l
Torque gauge
Set the scale to
Setting
Checking
l
Turn
the torque gauge slowly
(one rotation every 2 to 3
seconds) by band in the
take-up direction
1. If the take-up torque is outside the range, clean
the capstan D.D. motor pulley, reel belt and reel
pulley with cleaning liquid, then recheck the
torque.
2. If the take-up torque is still out of range, replace
the reel belt.
Notes :
1. Hold down the torque gauge so that
fly off.
2. When checking the take-up torque, do not keep
the reel disk locked for a longer time.
18
Supply reel disk
Figure l-29.
The gauge is held at-
its maximum value.
Figure l-30.
may not
it
Advertisement
Table of Contents
