Table of Contents
Advertisement
Error display
Contents of the error will be displayed in the remaining time display area when
an error occurs during the operation.
Error display
* P lease contact an authorized service center.
Service and maintenance will be easier if the error number is communicated when contacting.
Trouble Shooting
Problem
Cause and Remedy
Motor Noises
•
It sounds and feels like the massage heads are straining to get over wrinkles in the cloth.
•
There is operational noise of kneading or tapping actions.
•
There is a creaking noise when the massage heads are in operation.
•
There is a rattling sound when the massage heads move up or down.
•
The belt can be heard rotating.
•
The motor groans when it comes under load.
•
There is a strange sound when the massage heads move in and out.
•
There is a noise when I sit down.
•
There is a noise when the back cushion moves over the armrest when the seat is reclining.
•
There is a rubbing sound produced by the massage heads rubbing on the seat fabric.
•
There is a noise of discharging air.
•
The legrest rattles.
•
There is a humming sound from the pump.
•
There is operational noise of valves under the seat.
•
There is an unstable sound when air escapes during the leg stretch.
These sounds are perfectly normal and will not have any effect on the operation of the unit.
35
Time Remaining Display
<Example of error display>
•
For the error "U10"
and
will flash alternately.
For safety reasons, operation will terminate automatically when it cannot detect
if someone is seated. If this error occurs even if you are seated, sit back all the
way to the backrest, and operate from the start again.
Operation is terminated because there is a problem with internal
communication.
Operation is terminated because there is a problem with the massage
mechanism.
Operation except for the massage mechanism is terminated because there is a
problem with the reclining mechanism or the raise/lowering mechanism of the
legrest.
Contents
Hide quick links:
Advertisement
Table of Contents
