2
Confirm the lock switch key is
set to the "open" position.
3
Confirm the power switch is set
to the "on" position.
4
Press
button on the
controller twice.
•
Press once, and then press again approx.
1 second later.
The backrest will rise to the upright position
automatically.
3 Mount the controller tray on the right side
•
Mount it on the left side if the right side will be next to the wall or similar.
If you want to mount the controller on the left side
1
Press the
power.
2
Press
button on the controller and hold until the
legrest has risen far as it will go.
•
Continue pressing until a "beep-beep-beep" sound is heard.
3
Remove the controller cord from the cord-holder groove.
4
Move the controller cord under the legrest to the left side.
5
Fasten the controller cord at 2 points in the cord-holder
groove.
•
Press down from the edge if it does not fit in easily.
3
3
button on the controller to turn on the
Controller Cord
4
2
Legrest
2
5
Cord-Holder Groove
Push in
Controller Cord
3
12