Equipment Required; Test Record - Agilent Technologies 8163A User Manual

Description
Mainframe,
Device under Test
Laser Source
Power Sensor
Tunable Laser
Module
Connector Adapter 2 x Agilent 81000AI
Singlemode Fiber
Agilent 8163A Lightwave Multimeter, Agilent 8164A Lightwave Measurement System, & Agilent 8166A Lightwave
Multichannel System, Fourth Edition

Equipment Required

Equipment required for the Performance Test is listed in the table below. Any
equipment that satisfies the critical specifications given in the table may be
substituted for recommended models.
Table 8 Equipment Required for Performance Tests
Agilent 8163A
Lightwave Multimeter
HP 81552SM
(HP 81553SM)
(HP 81554SM)
HP 81531A
(HP 81532A)
(HP 81536A)
(HP 81530A)
(HP 81533B Interface
Module plus
HP 81524 Optical Head or
HP 81521B
or HP 81525A)
N O TE When using a high power laser source of type Agilent 81655A, Agilent 81656A,
or Agilent 81657A, you must use an Interface Module and a high power Optical
Head of type Agilent 81625A or Agilent 81626A.
N/A
(depending on patchcord)
Agilent 81101AC
(other Agilent patchcord
depending on DUT's
conenctor option)
Part numbers in brackets indicate alternative models.

Test Record

Results of the Performance Test may be tabulated in the Test Record provided
after the test procedures. It is recommended that you fill out the Test Record and
refer to it while doing the test. Since the test limits and set-up information are
printed on the Test Record for easy reference, the record can also be used as an
Model
Agilent 8164A
Lightwave Measurement
System
HP 81552SM
(HP 81553SM)
(HP81554SM)
HP 81531A
(HP 81532A)
(HP 81533A)
(HP 81530A)
(HP 81533B Interface
Module plus
HP 81524 Optical Head or
HP 81521B
or HP 81525A)
Agilent 81640A
(Agilent 81680A)
(Agilent 81682A)
2 x Agilent 81000AI
(depending on patchcord)
Agilent 81101AC
(other Agilent patchcord
depending on DUT's
conenctor option)
Performance Tests
Agilent 8166A
Lightwave Multichannel
System
Agilent 81650A
(any other Agilent 8165x
series Laser Source)
Agilent 81631A
(any other Agilent 8163x
series Power Sensor)
(Agilent 81618A or
Agilent 81619A Interface
Module plus
Agilent 81620A Optical
Head or any other Optical
Head from the
Agilent 8162x series)
N/A
2 x Agilent 81000AI
(depending on patchcord)
Agilent 81101AC
(other Agilent patchcord
depending on DUT's
conenctor option)
247