Table of Contents
Advertisement
Preparing for the remote control
Please insert the batteries into the remote control before using it. If the remote
control starts to malfunction, try to replace the batteries. If you will not use the
remote control for long period, remove the batteries from the remote control and
store them in a safe place.
1.
Remove the battery cover.
Align and insert the two AA batteries
2.
according to their plus and minus
terminals as indicated in the remote
control. (Use the appropriate AA
carbon-zinc or alkaline batteries (non-
rechargeable) in accordance with laws
and regulations.)
Put the battery cover back to the former state.
3.
WARNING
directed. Improper use may result in battery explosion, cracking or leakage,
When replacing the batteries, replace both of the batteries with new batteries
of the same type. Do not use a new battery with a used battery.
types at the same time. Do not mix a new battery with used one.
Make sure the plus and minus terminals are correctly aligned when loading a battery.
Do not recharge, short circuit, solder or disassemble a battery.
If you observe battery leakage, wipe out the leakage and then replace a battery.
If the leakage adheres to your body or clothes, rinse well with water immediately.
Obey the local laws on disposing the battery.
Always handle the batteries with care and use them only as
5
Advertisement
Table of Contents
