Turning Off The Power - Dukane DLP 8964WUSS User Manual

Turning off the power

1. Press the STANDBY/ON button on the
projector or the remote control.
The message "Power off?" will appear
on the screen for about 5 seconds.
2. Press the STANDBY/ON button again
while the message appears.
The light source will go off, and the
POWER indicator will begin blinking
in orange. Then the POWER indicator
will stop blinking and light in steady
orange when the light source cooling is
complete.
3. Attach the lens cover, after the POWER indicator turns to steady orange.
WARNING
after use, since it is too hot.
be close to the projector and easily accessible.
NOTE
powered off.
Manual - Operating Guide.
STANDBY/ON button
POWER indicator
INPUT
ASPECT
MAGNIFY
ON
OFF
PAGE
UP
DOWN
ESC
OSD MSG
User's
MYBUTTON
PbyP AUTO FREEZE
FOCUS ZOOM VOLUME
GEOMETRY PICTURE MUTE
INTERACTIVE NETWORK BLANK
MENU
ENTER
RESET
15