Preparing For The Remote Control - Dukane 8142WISS User Manual

Preparing for the remote control

Please insert the batteries into the remote control before using it. If the remote
control starts to malfunction, try to replace the batteries. If you will not use the
remote control for long period, remove the batteries from the remote control and
store them in a safe place.
1.
Remove the battery cover.
2.
Align and insert the two AA batteries (
AA carbon-zinc or alkaline batteries (non-rechargeable) in
accordance with laws and regulations.
plus and minus terminals as indicated in the remote control.
3.
Put the battery cover back to the former state.
WARNING ►For precautions on battery handling, refer to the next page.
NOTE
• Try changing the batteries when the remote
control malfunctions.
• This remote control works with the remote
sensors on the projector using infrared light
(Class 1 LED). The active sensor senses
the remote control signal assigned within 60
degrees to right and left, and within 3 meters.
For details, see the "Operating Guide".
• Prevent the remote sensors from being hit by
a strong ray. It may cause malfunction of the
projector and remote control.
10
Use the appropriate
) according to their
Remote sensor
30° 30°
3m
(approx.)