Table of Contents
Advertisement
Cleaning the intake vents
It is recommended to check and clean the intake vents periodically for maintaining
the ventilation inside of the projector and normal operation.
If a message prompts you to clean or check the intake vents, or if the TEMP
indicator lights in red, clean the intake vents immediately.
How to clean the intake vents
Turn the projector off and unplug the power cord. Allow the projector to cool
1.
Use a vacuum cleaner on and around the intake vents.
2.
WARNING
taking care of the intake vents, make sure to turn the projector off and to pull
If you take care of the projector with the power cord connected, it could cause
state, it could cause a burn.
NOTE
power off and allow the inside of the projector to cool down.
16
Advertisement
Table of Contents
