Displaying The Picture - Dukane DLP 8964WUSS User Manual

Displaying the picture

1. Activate your signal source. Turn the signal
source on, and make it send the signal to the
projector.
2. Use the VOLUME + / - buttons to adjust the
volume.
3. Press INPUT button on the projector or the
remote control. Select a desirable input referring
to the displayed input list.
4. Press the ASPECT button on the remote control.
Each time you press the button, the projector
switches the mode for aspect ratio in turn.
Use the ZOOM ring to adjust the screen size.
5.
Use the FOCUS ring to focus the picture.
6.
7.
cannot loosen.
8. Turn the VERTICAL adjuster fully
counterclockwise. Then turn it clockwise and
adjust the vertical lens position upward.
Turn the HORIZONTAL adjuster clockwise or
9.
counterclockwise to adjust the horizontal lens
position.
CAUTION
Taking any other action may cause the damage on
the projector.
NOTE
The ASPECT button does not work when
no proper signal is inputted.
There may be some noise and/or the screen may
is not a malfunction.
see User's Manual - Operating Guide.
14
ZOOM ring by STOPPER so that it
VOLUME
INPUT MYBUTTON
ASPECT PbyP AUTO FREEZE
VOLUME + / -
MAGNIFY FOCUS ZOOM VOLUME
ON
OFF
buttons
PAGE
UP GEOMETRY PICTURE MUTE
DOWN INTERACTIVE NETWORK BLANK
ESC MENU
ENTER
OSD MSG RESET
INPUT button
INPUT
MYBUTTON
INPUT INPUT button
ASPECT PbyP AUTO FREEZE
MAGNIFY FOCUS ZOOM VOLUME
ON
OFF
PAGE
UP GEOMETRY PICTURE MUTE
ASPECT
DOWN INTERACTIVE NETWORK BLANK
ASPECT button
ESC MENU
ENTER
OSD MSG RESET
STOPPER
ZOOM ring
FOCUS ring
VERTICAL adjuster
HORIZONTAL adjuster