Fastening the adapter cover
prevention.
USB wireless adapter:
Loosen the screw on the bottom left of the WIRELESS port.
1.
Insert the tab of the cover into the hole
2.
at the upper right of the WIRELESS
port in the direction of the arrow.
Align the screw holes on the projector
3.
and the cover. Then insert the screw
removed from the projector into the
hole and tighten the screw.
WARNING
to put in the mouth.
disconnect the projector power cord for 10 minutes before touching the adapter.
Attaching the cap
Attach the bundled cap to prevent
contamination by dust or foreign matter
when the cable is not connected.
Temperature range: 0 ~ 40°C(operating)
Tab
HDMI Cap
9