Step 2: Connecting The Audio Cords - Sony DVP-NS400D Operating Instructions Manual

Step 2: Connecting the Audio Cords

Refer to the chart below to select the connection that best suits your system. The surround effects
you will enjoy depend on the connections and components you use.
Select a connection
Select one of the following connections,
Connection
(page 22)
A
(page 23)
B
(page 23)
B
(page 25)
C
(page 25)
C
(page 27)
D
* Manufactured under license from Dolby Laboratories. "Dolby," "Pro Logic," and the double-D symbol are
trademarks of Dolby Laboratories. Confidential unpublished works. © 1992-1997 Dolby Laboratories. All rights
reserved.
** "DTS" is a registered trademark of Digital Theater Systems, Inc.
A
Components to be connected
TV (stereo)
AV amplifier (receiver) having 5.1ch input jacks
4 speakers
(front L and R, rear L and R)
6 speakers
(front L and R, centre, rear L and R, subwoofer)
AV amplifier (receiver) having a Dolby
decoder and a digital input jack
6 speakers
(front L and R, centre, rear L and R, subwoofer)
Stereo amplifier (receiver)
(having L and R audio input jacks only, or having a digital input jack)
2 speakers
(front L and R)
MD deck/DAT deck
AV amplifier (receiver) with a Dolby Surround (Pro Logic) decoder
(having L and R audio input jacks only, or having a digital input jack)
3 speakers
(front L and R, and rear (monaural))
6 speakers
(front L and R, centre, rear L and R, subwoofer)
through .
D
*
Digital, MPEG audio or DTS
**
continued
21