Sony DVP-NS400D Operating Instructions Manual page 32

6
Press ENTER.
Quick Setup is finished. All connections and setup operations are complete.
Note
You can directly start Quick Setup only when you run it for the first time.
To run Quick Setup a second time, select "QUICK" under "SETUP" in the Control Menu (page 68).
Enjoying the surround sound effects
To enjoy the surround sound effects of this player or your amplifier (receiver), the following
items must be set as described below for the audio connection you selected in pages 23 to 27
( through
B
you first connect the player. Refer to page 68 for using the Setup Display.
Audio Connection (pages 23 to 27)
A
No additional settings are needed.
B-1
Item
DISTANCE
BALANCE
LEVEL
If the sound distorts even when the volume is turned down, set "AUDIO ATT" to "ON" (page 73).
If "ENHANCED" or "SOFT" is selected in "CENTER SPEAKER EQ," it makes the spoken
track sound clear (page 73).
B-2 C-2 D-2
Item
DOWNMIX
DIGITAL OUT
Set "48kHz/96kHz PCM" to "96kHz/24bit," only if you connect the amplifier (receiver) that
conforms to the 96 kHz sampling frequency (page 74).
C-1 D-1
Item
DOWNMIX
If the sound distorts even when the volume is turned down, set "AUDIO ATT" to "ON" (page 73).
32
). Each of these are the default settings and do not need to be adjusted when
D
You select
Set according to the connected
speakers
You select
DOLBY SURROUND
ON
You select
DOLBY SURROUND
Page
76
Page
73
73
Page
73