Sony DVP-NS400D Operating Instructions Manual page 52

Displaying the audio information of
the disc
When you select "AUDIO," the channels
being played are displayed on the screen.
For example, in Dolby Digital format,
multiple signals ranging from monaural to
5.1 channel signals can be recorded on a
DVD. Depending on the DVD, the number of
the recorded channels may differ.
1 2 ( 2 7 )
1 8 ( 3 4 )
T
1: ENGLISH
Current playing program format**
* "PCM," "MPEG," "DTS," or "DOLBY
DIGITAL" is displayed.
In case of "DOLBY DIGITAL," the
channels in the playing track are displayed
by numbers as follows:
For Dolby Digital 5.1 ch:
DOLBY DIGITAL 3 / 2 . 1
Front component 2+
Centre component 1
**The letters in the programme format
display mean the following sound
component:
L: Front (left)
R : Front (right)
C : Centre
LS : Rear (left)
RS : Rear (right)
S : Rear (monaural): The rear
component of the Dolby Surround
processed signal and the Dolby
Digital signal.
LFE :LFE (Low Frequency Effect)
52
Current audio format*
DVD
1 : 3 2 : 5 5
PROGRAM FORMAT
DOLBY DIGITAL 3/2.1
L C R
LFE
LS RS
Rear
component 2
LFE (Low Frequency
Effect) component 1
The display examples are as follows:
PCM (stereo)
PROGRAM FORMAT
PCM 48kHz 24bit
Dolby Surround
PROGRAM FORMAT
DOLBY DIGITAL 2/0
DOLBY SURROUND
L
Dolby Digital 5.1ch
When an LFE signal component is output,
"LFE" is enclosed in a solid line. When an
LFE signal component is not output, "LFE"
is enclosed in a broken line.
PROGRAM FORMAT
DOLBY DIGITAL 3/2.1
L
LS
MPEG
PROGRAM FORMAT
MPEG 2/2
L
LS
DTS
"LFE" is always enclosed in a solid line
regardless of the LFE signal component
being output.
PROGRAM FORMAT
DTS 3/2.1
L
LS
C R
S
C R
LFE
RS
R
RS
C R
LFE
RS