Jonsered 1250RZ Operator's Manual page 9

• Take the delivery instructions from your Hiab Service workshop, or receive instruction from an
experienced person from your own company. Only then should you operate your crane.
• Ensure that you comply with the statutory requirements of the country in which you use the crane
(for example, certificate, obligatory safety-helmet).
DANGER
• Carry out yourself only the service and
maintenance work you have the requisite
knowledge and experience of.
• All other maintenance work may only be
carried out by a Hiab service workshop.
• Ensure that every defect is rectified
immediately, according to the instructions.
• Follow the instructions exactly!
• All other work to rectify faults must be
performed by personnel in a Hiab service
workshop!
WARNING
• Never clean the electronic system, plastic components, signs or bearings with a
high-pressure jet cleaner. It could cause damage.
• Never expose the electronic system to high electrical voltages. This could
damage the control system.
• Never immerse the controller in water or other liquid. This will make the
controller unusable.
If your crane is equipped with add-on lifting equipment (hoist, rotator, etc.):
• The operation of the crane with add-on lifting equipment can differ from the
operation as described in this manual.
• You should therefore study the Operating Manual for the add-on equipment
carefully, before you use the crane.
• Take particular note when placing the crane in to or out of transport position.
Introduction
Jonsered 1250RZ -1500RZ safety+R CE 9